Alarm, error, and system messages
11.1
General notes
11.1
If faulty states are detected in the measuring cycles, an alarm is generated and execution of
the measuring cycle is aborted.
In addition, the measuring cycles issue messages in the dialog line of the PLC. These
message will not interrupt the program execution.
11.2
Error rectification in the measuring cycles
11.2
Alarms with numbers between 61000 and 62999 are generated in the measuring cycles.
This range of numbers, in turn, is divided again with regard to alarm responses and cancel
criteria.
The error text that is displayed together with the alarm number gives you more detailed
information on the error cause.
Alarm number
61000 ... 61999
62000 ... 62999
11.3
Overview of measuring cycle alarms
11.3
The measuring cycle alarms are listed below:
References: /DA/ Diagnostics Manual
Measuring cycles
Programming Manual, Release 04/2006, 6FC5398-4BP10-0BA0
Clearing criterion
Alarm Response
NC_RESET
Block preparation in the NC is aborted
Clear key
Program execution is not interrupted; display only.
11
11-1