Table of Contents
Advertisement
An example of this could be:
First setup your counter in the Counters menu. Enable it, Name it, enter the number the
count will Start At and enter at what number it will Rollover and start again.
Menu" on page 89.
Event 1 has been set up with Cause 1 as a Sheduled interval every 30 seconds. The Effect
is that User Counter 1 is set to increment by 1. When the scheduled interval occurs, every
30 seconds, Counter 1 will increment by 1.
A second Event can then be set up using the User Counter Effect in Event 1 as the Cause
for Event 2. In this example the Cause will be triggered by User Counter 1 (in Event 1)
reaching an count of 50. The Effect of this will be a Mark on Chart.
Event 2 example
Cause = User Counter 1 triggers at 50 increments
Effect = A Mark is placed on the Chart
In summary: every 30 seconds a scheduled interval will cause a counter to increment by 1.
When the increments reach 50 a mark will be placed on the Chart.
84
Event 1 example
Cause = Scheduled interval every 30 seconds
Effect = User Counter increments by 1
Power up
See "Counters
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
Advertisement
Table of Contents
