Table of Contents
Advertisement
(Main Menu > Configure > Setup > Edit Setup> Pens > Totaliser)
The Totals option must be active to use this option. See
on page 167.
To Start, Stop, Reset and View Totals, see
The Totaliser function is normally associated with flow monitoring applications. The input to
the recorder would be a measure of flow rate (eg. In litres per second) and the total amount
that has flowed over a specified time period. Multiple totalisations are possible with the use
of extra pens (firmware Credit option). Totalisation values are 10 digits plus exponent.
Click on Totaliser to set up the totalising profile per pen.
Select Totaliser from the Pen screen to display the totalising setup menu
68
100%
50%
40%
Alarm activated
at this point
0%
Totaliser Menu
Totaliser menus showing Normal and Sterilisation types
Menu path to current menu
• Enabled - Toggles On and Off to activate or de-activate totalising for this pen.
Power up
Alarm de-activated
at this point
"Totals" on page 125.
Figure 4.5 Hysteresis Level
10% Hysteresis level
Low Alarm Level
Table 7.1, "Firmware Options,"
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
Advertisement
Table of Contents
