Table of Contents
Advertisement
(Not available for the SIREC D200 recorder).
(Main Menu > Configure > Setup > Edit Setup> Field IO > Pulse Input)
Only available when a Pulse Input card is fitted as an option. The Pulse Input card operates
up to a frequency of 25kHz max.
Input: Low < 1V, High >4V to <50V DC or Volt free input: Low = short circuit, High = open
circuit.
If a Pulse input card is fitted in slot A the first 4 pens will display the maths function of HPULn
in Edit Maths in the Pens menu as default to display the pulse reading. For more information
see
Press the Pulse Input button to display the available pulse inputs.
Click on individual Pulse Input number to set up each channel profile.
When the configuration is complete select the Finish button to Commit, Discard or Commit
Later. Select the Back button to return to the previous menu.
58
Pulse Input
"Appendix B: Maths Expressions" on page
• Enabled - Toggle On and Off.
• Hertz - Fixed as Frequency Measure (in Hertz).
• Update Rate - Fixed at 1Hz
• Label - Select and enter an identification label for the pulse input. Select and enter a
label. Up to 16 characters.
Power up
See "Pulse Input Channel Numbers" on page
233.
Menu path to current menu
The Pulse Input screen
displays all the available
pulse input channels that
can be set up.
Each channel displays its
individual settings.
Select a numbered chan-
nel to edit the configura-
tion of each Pulse input.
43-TV-25-35 GLO Iss.4 Dec 06 UK
23.
A5E01001767-04
Advertisement
Table of Contents
