Philips LPC2119 User Manual page 269

Philips Semiconductors Preliminary User Manual
ARM-based Microcontroller LPC2119/2129/2292/2294
"execute code" buffer size. Also refer to RM_OPT_EXECUTECODE option.
RM_OPT_GATHER_STATISTICS=FALSE
This option enables or disables the code for gathering statistics about the internal operation of RealMonitor.
RM_DEBUG=FALSE
This option enables or disables additional debugging and error-checking code in RealMonitor.
RM_OPT_BUILDIDENTIFIER=FALSE
This option determines whether a build identifier is built into the capabilities table of RMTarget. Capabilities table is stored in
ROM.
RM_OPT_SDM_INFO=FALSE
SDM gives additional information about application board and processor to debug tools.
RM_OPT_MEMORYMAP=FALSE
This option determines whether a memory map of the board is built into the target and made available through the capabilities
table
RM_OPT_USE_INTERRUPTS=TRUE
This option specifies whether RMTarget is built for interrupt-driven mode or polled mode.
RM_FIFOSIZE=NA
This option specifies the size, in words, of the data logging FIFO buffer.
CHAIN_VECTORS=FALSE
This option allows RMTarget to support vector chaining through µHAL (ARM HW abstraction API).
RealMonitor 269 January 08, 2004