Philips Semiconductors
ARM-based Microcontroller
Table 165: Pulse Width Modulator Register Map
Address
Name
0xE0014044 PWMMR5
0xE0014048 PWMMR6
0xE001404C PWMPCR
0xE0014050 PWMLER PWM Latch Enable Register. Enables use of new PWM match values.
*Reset Value refers to the data stored in used bits only. It does not include reserved bits content.
Pulse Width Modulator (PWM)
PWM Match Register 5. MR5 can be enabled through MCR to reset the TC,
stop both the TC and PC, and/or generate an interrupt when it matches the TC.
In addition, a match between MR5 and the TC clears PWM5 in either single-
edge mode or double-edge mode, and sets PWM6 if it is in double-edge mode.
PWM Match Register 6. MR6 can be enabled through MCR to reset the TC,
stop both the TC and PC, and/or generate an interrupt when it matches the TC.
In addition, a match between MR6 and the TC clears PWM6 in either single-
edge mode or double-edge mode.
PWM Control Register. Enables PWM outputs and selects PWM channel types
as either single edge or double edge controlled.
Description
197
Preliminary User Manual
LPC2119/2129/2292/2294
Access
R/W
R/W
R/W
R/W
January 08, 2004
Reset
Value*
0
0
0
0