Signal Time; Led 04: Voice Mail Message Waiting Cancel Via Dial #64/Automatic; Led 03: Ringing Modes; Led 02: Call Forward/Station Hunt Override From Dss Console - Toshiba Strata DK40 Programming Manual

System & Station
LED 06: Voice Mail Identification Code, Dual-tone Multi-
frequency (DTMF) Signal Time
DTMF digits automatically sent to RSTU/PSTU/KSTU3 voice mail ports can be sent in
either 80- or 160-millisecond bursts. This applies to digits sent via the voice mail
identification code (&9892&98:) set at each station. This also applies to manually dialled
digits sent to voice mail ports from Toshiba telephones, including 2000-series digital
telephones.
LED 04: Voice Mail Message Waiting Cancel Via Dial #64/
Automatic
Set Voice Mail Message Waiting Cancel Via Dial &97 (LED 04 ON) if the Strata DK40
system is connected to a voice mail (VM) system that sets station Message Waiting (MW)
LEDs by dialling &96 + Station number. This ensures the message LED remains flashing
and is not cancelled by the DK40 system until the VM machine cancels the Message LED by
pressing &97 + Station Intercom number, [PDN].
Set to Automatic (LED 04 OFF) to cancel the flashing message waiting LED any time a
station calls the VM machine and the VM machine answers.

LED 03: Ringing Modes

The Strata DK40 system can be set for either two-ringing mode or three-ringing mode
operation. The Day and Night modes are available with the two-mode operation, and the Day,
Day2, and Nights modes are available with the three-mode operation. Each ringing mode has
distinct Exchange line ring assignments (Programs 71~75, 78; 81~89).
The three-mode selection is useful for alternate answering positions. Station users can change
modes with the 1LJKW 7UDQVIHU button on either a DSS console
telephone (Program 39). This feature applies to loop start lines, and also tie, DDI lines.

LED 02: Call Forward/Station Hunt Override From DSS Console

If a station has activated Call Forwarding or Station Hunting, all calls to that station—except
for calls from the DSS console position—will forward or hunt to another number. You can
Call Forward from the console itself or from the digital or electronic telephone assigned to it.
You cannot Call Forward from both; it is an either/or choice. If the console calls (using the
DSS console station buttons) calls are forwarded, the telephone attached to the console will
not be forwarded, and vice versa. This allows the console operator flexibility in reaching a
station user that has Call Forward or Station Hunt telephone options activated.
Note

LED 01: Tone First/Voice First-DSS Console

The intercom call signal from a DSS console can be set for Tone First Signalling or
Voice First Signalling. This setting is independent of the system-wide signal option in
Program 10-1. Thus, DSS consoles and their attendant stations can ring with different
signalling modes. Voice First applies to called [PDNs] only.
3-22
This feature applies to both types of DSS consoles, the DDSS and the HDSS.
Program 10-2 System Assignments, Part 2 of 5
Strata DK40 Programming Manual Spring 1999
(Program 29), and/or a