5
Parameters operating area
5.5
Setting data
5.5.3 Spindle data
Max./min.
Programmed
Setting
data
Spindle
data
Edit spindle data
5-224
Additional information
The limit values for the maximum and minimum permissible values are
defined in the machine data.
Function
The value entered for the spindle speed in the fields max./min. must
be within the limit values defined in the machine data.
Programmable upper speed limit (G96) for constant cutting speed.
Sequence of operations
Press the "Setting data" softkey.
The vertical softkey bar changes.
Press the "Spindle data" softkey.
The "Spindle data limitation" window opens.
Position the cursor bar on the appropriate input field and enter a new
value.
or:
Select a new value using the <SELECT> key.
Additional information
• The limit values for the maximum and minimum permissible values
are defined in the machine data.
• The "Spindle data" function is displayed only if a spindle is
configured.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
5
01/2008
© Siemens AG 2008 All rights reserved.