Siemens SINUMERIK 840Di sl Operating Manual page 322

6
"Program" operating area
6.8 Program simulation
"Channel/spindle" menu
vertical
Channel /
spindle
Sequence
Program name
6-322
Additional information
1. If no Match data operation has yet taken place (and the NCK
component is installed), a request is automatically issued in the
form of a message when the simulation is initialized. The user is
automatically informed of modifications to tool data.
2. The working cycles are loaded from the part program once on the
first call and remain active for all subsequent simulation sessions.
3. With the "Match cycles" softkey you can load updated cycles with a
new timestamp into the simulation. Cycles with access protection
are always reloaded, irrespective of the timestamp. The Match
data process only needs to be repeated if changes have been
made to the cycles.
4. It is recommended to set MD11210=0 "Match all machine data".
Only accessible from RESET or STOP status.
The screen shows the current execution list for the selected part
programs.
Simulation sequence of programs
List of programs
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
6
01/2008
© Siemens AG 2008 All rights reserved.