Configuring The Pg/Pc Interface (Pc Systems) - Siemens sinumerik 840d sl Configuration Manual

Installation

2.3 Configuring the PG/PC interface (PC systems)

2.3 Configuring the PG/PC interface (PC systems)
The PG/PC interface of the PCU 50.5 must be set for operation via TCP/IP for "WinCC RT
Advanced" Runtime to be able to read data from the NCU.
This setting is made automatically when you install the software on a PCU 50.5 (Page 26).
You therefore only have to make this setting if the automatic configuration failed or if you are
using a different SIEMENS PC system.
Procedure
To configure the PG/PC interface of the PCU 50.5, follow these steps:
1. Open the Control Panel and activate the "Small Icons" or "Large Icons" view in the
"Display" drop-down list.
2. Click "Set PG/PC Interface".
The dialog is opened.
28
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014