Configuring Screen Objects; Overview - Siemens sinumerik 840d sl Configuration Manual

Configuring screen objects

8.1

Overview

Overview
Once you have planned and implemented the structure and number of screens in your
configuration, you can add screen objects in the required screens.
In addition to the standard range of screen objects in SIMATIC WinCC Advanced, you can
configure the "NC program part" control:
● Configuration and operation (Page 114)
● Properties (Page 116)
● Change via script (Page 118)
Additional information
You can find information about the standard range of screen objects of SIMATIC WinCC
Advanced in the information system:
● section "Visualizing processes > Creating screens > Working with objects".
● section "Visualizing processes > Creating screens > Working with operating objects".
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014
8
113