Hitachi Compute Blade 500 Series User Manual page 73

Tip: If the OS image cannot be found through the boot device or PXE server,
the server blade may reboot again and again.
Confirm the connection of boot device or PXE server in this case.
Add Boot Option sub menu
Select Generic Boot Option, and press Enter.
Note: You can only add Standard Boot Options.
Do not add Advanced Boot Options.
Tip: To boot from a device not included in Boot Order, add it to Boot Option
for both Primary Boot Sequence and Secondary (WOL) Boot Sequence. Select
Add Boot Option in a category depending on your purpose.
Select item to add, and press Enter.
Note:
• Do not add unnecessary items, which may cause lead to some troubles
including longer boot time.
Tip: To return to the Boot Manager, highlight the target item, and then
press Enter and Esc twice.
Delete Boot Option sub menu
Select the check box of the item to delete, and press Enter. And Select a
Commit Changes and Exit and press Enter.
Hitachi Compute Blade 500 Series EFI User's Guide
UEFI setup menu
2-53