Hitachi Compute Blade 500 Series User Manual page 474

Note: Do not change Legacy Only. Legacy Only does not indicated
"Bootable Device", Legacy Only indicate that all devices following to the
line are booted up with legacy mode.
Legacy Mode is prerequisite for booting up on CB 500 server blade.
11 Select Commit Changes, and then press Enter.
.
12 Press ESC to go back the System Configuration and Boot
.
Management window.
13 Select Save Settings, and then press Enter.
.
Note: It may take one or two minutes to save Save Settings.
The screen may become dark while saving Save Settings.
Do not perform another operation until saving Save Settings.
14 Select Exit Setup after Save Settings is completed, and then press
.
Enter.
15 The following text is displayed on the window, and press Y to exit the EFI
.
menu.
8-6
BIOS settings for PXE boot
Hitachi Compute Blade 500 Series EFI User's Guide