Hitachi Compute Blade 500 Series User Manual page 165

Menu items
1 Do not set this item because it is not supported.
.
2 Use this item with the default setting.
.
3 When using the storage expansion blade, you must enable the Controller BIOS for
.
LSI SAS 2008 and confirm that Controller BIOS for LSI SAS 2208 is disabled. For
Controller BIOS of LSI SAS 2208, see
4-17.
Schedule CC page: schedule consistency check setting submenu
Click Supported of Schedule CC in the Properties: Controller Properties
submenu 2 window. The following window is displayed.
Note: Do not set the value of this item. This item is not supported
The following table shows description of menu items in the window.
Table 3-8 Schedule CC page menu items
Menu items
CC Frequency Sets the CC schedule function:
Enable or Disable
CC Start (mm/dd/ Sets on what date the
yyyy) consistency check starts.
MegaRAID WebBIOS for LSI SAS 2008
Hitachi Compute Blade 500 Series EFI User's Guide
Description
Controller properties submenu 3 on page
Description
Setting/display value
Setting/display value
[Disable (invalid schedule)] /
Continuous / Hourly / Daily /
<<Weekly>> /Monthly
[01/01/2000] / Appropriate
1
value
3-15