Samsung iDCS 500 Programming Manual page 329

iDCS 500
TECHNICAL MANUAL
instructions on how to create these recordings see Special Applications, Auto
Attendant/Uniform Call Distribution.
NO STATION MESSAGE
Determines what message will play if the caller dials an invalid extension (not
installed). This message has a default selection of ROM message number 50 but it
can be replaced with a customised message (01–48) or with any other ROM
message (49–64). This retry message will repeat for the value contained in the retry
counter. See Retry Count. For instructions on how to create these recordings see
Special Applications, Auto Attendant/Uniform Call Distribution.
NO ACTION MESSAGE
Determines what message will play if the caller does not act. This message has a
default selection of ROM message number 59 but it can be replaced with a
customised message (01–48) or with any other ROM message (49–64).
CAMP-ON
Determines if calls will be transferred to busy stations. Calls transferred to busy
stations will be camped-on. The default value is OFF.
ANSWER DELAY
Sets how many rings will occur before this plan answers a call. The default value is
01 second.
RETRY COUNT
Determines how many selection errors a caller may make before being transferred
to the invalid digits destination. The default value is 3.
TRANSLATION TABLE
Determines what translation table this plan will use. (see MMC 732 Auto Attendant
Trans Table). The default translation table is 01.
BUSY DESTINATION
Determines the destination for the call if the selected destination is busy. This can
be another station, station group or plan. Plans are entered by pressing key #19
(CONF) plus two digits 01–12. The default value is 500.
NO ANSWER DESTINATION
Determines the destination for the call if the selected destination does not answer.
This can be another station, station group or plan. Plans are entered by pressing
key #19 (CONF) plus two digits 01–12. The default value is 500.
MMC: 733
PROGRAMMING
PART 2 NOVEMBER 2001
HOME
PAGE
Table of
Contents
HELP