Battery Charge Indicator; Turning The Handset On And Off; Range - D-Link DPH-C160S User Manual

Handset & base station
Hide thumbs Also See for DPH-C160S:
Table of Contents

Advertisement

BATTERY CHARGE INDICATOR

The symbol
time to recharge the batteries. When the battery is running low the
LCD display will show an empty battery symbol and a warning tone will
be heard. If the handset is not recharged at this time, the phone will
power off and cease to function until it is recharged.
The symbol
PLEASE NOTE!
When the handset has been switched off and then on again it may take up to five
minutes for the correct charge to be shown on the LCD display.
TURNING THE HANDSET ON/OFF
Press and hold the
When the handset is turned off, no calls can be made or received. The
handset is designed to be always turned on, i.e. it is not necessary to
turn it off overnight. However, we recommend turning the handset off
if it is not to be used for a prolonged period of time, e.g. during a
holiday. If the batteries run low, the handset will turn itself off. If the
handset is power off and placed back into the cradle on the base
station it will power itself back on and start to recharge within 1-2
minutes.

RANGE

The range of the DPH-C160S varies depending on different factors in
the surrounding environment. Radio waves transmitting the call may be
hindered by obstructions or signal reflections that can reduce the
range.
Specified ranges require unobstructed transmission between the
handset and the base station. In such ideal conditions the DPH-C160Ss
range can be up to 300 metres. In densely populated areas, houses,
apartments, etc. the range will be reduced. Try to get the best range
by relocating the base station, the ideal location is a high and
unobstructed place.
7
Installation
on the LCD display of the handset indicates when it is
will be displayed when the battery is fully charged.
for a few seconds to turn the handset on or off.
www.dlink.com.au

Advertisement

Table of Contents
loading

Table of Contents