Table of Contents
Advertisement
Installation
BELT CLIP
A belt clip is included, which can be fitted on the back of the handset.
The belt clip enables the handset to be attached to a belt, waistband or
similar. To attach the clip, align it with the indents on the sides of the
handset and press it into place over the back of the handset. You
should hear it click into place.
BATTERY
The DPH-C160S is supplied with environmentally-friendly nickel metal
hydride (NiMH) batteries – 3 x AAA 1.2V. As with all batteries,
performance may degrade over time; should you notice that the
standby time has reduced considerably or there are signs of leakage,
the batteries should be replaced. Fully-charged batteries will last for
approx 120 hours in standby and 10 hours call time. These operation
times apply at normal room temperate. Full battery capacity will be
achieved once the batteries have been charged 4-5 times, completely
discharged batteries will take 10 hours to fully recharge. To maintain
optimum charge capacity it is better for handsets to be charged every
other night, rather than after every call.
The base station has an automatic charging mechanism that prevents
the batteries from being overcharged or damaged by prolonged
charging.
PLEASE NOTE!
To ensure and maintain good charging of the handset batteries we recommend that the
base station and handset charging contacts are cleaned regularly. i.e. monthly, with a
pencil eraser and/or soft dry cloth. The recharging system used in this model may result
in the handset and the batteries becoming warm. This is normal and will not damage the
equipment.
When the telephone is installed for the first time, the batteries must be charged for 12
hours before using the telephone. Use original batteries only. The warranty does not
cover any damage caused by incorrect use of batteries. Please dispose of any batteries in
a responsible and environmentally friendly manner.
6
www.dlink.com.au
Advertisement
Table of Contents
