Table of Contents
Advertisement
VOLUME CONTROL
The speaker and earpiece volume may be adjusted during a call using
the
or
(1 – low, 9 – high).
HANDS FREE SPEAKERPHONE
In addition to normal handset mode you can select hands free mode.
With hands free mode you make a call then place the handset on a
table or similar hard surface, this allows everyone in the room to
converse with the caller.
1. Dial the required telephone number. Mistakes can be erased by
pressing the Clear button.
2. Press
earpiece volume can be adjusted using the
3. Press and hold the
activate.
4. When you have selected hands free mode place the handset on
a hard flat surface, e.g. table.
5. Speak towards the microphone on the lower front edge of the
handset (maximum 1 metre away).
6. You can adjust the speaker volume during the call by pressing
the
or
7. Press and hold the
speaker.
8. Press
PLEASE NOTE!
In hands free mode it is only possible for one person to talk. The switch over between
speaker and microphone is automatic and dependant on the sound level of the incoming
call and microphone respectively. It is therefore essential that there are no loud noises,
e.g. music, in the immediate vicinity of the telephone, as this will disrupt the speaker
function.
11
Operation
or
and the telephone number will be dialled. The
for 2-3 seconds and the speaker will
.
for 2-3 seconds to deactivate the
to terminate the call.
or
.
www.dlink.com.au
Advertisement
Table of Contents
