DIAL MODE
This function allows you to configure the base station for use with
DTMF or PULSE dialling.
1. Press Menu.
2. Scroll through using
3. Enter your current base station PIN code (default PIN: 1590).
4. Now scroll through using
5. Scroll using
6. Press OK to confirm the selection.
FLASH TIME
This function allows you to configure the Flash Time used for changing
between calls.
1. Press Menu.
2. Scroll through using
3. Enter your current base station PIN code (default PIN: 1590).
4. Now scroll through using
5. Scroll using
6. Press OK to confirm the selection.
PLEASE NOTE!
You can change the Flash Time to 100ms, 120ms, 300ms or 600ms.
25
BS Setting
or
to BS Setting. Press OK.
or
or
and select the Dial Mode you wish to use.
or
to BS Setting. Press OK.
or
or
and select the Flash Time you wish to use.
to Dial Mode. Press OK.
to Flash Time. Press OK.
www.dlink.com.au