System Configurations And Speaker Connections; Sample Configuration Using The Srp-X500P Factory-Settings - Sony SRP-X500P Operating Instructions Manual

System Configurations and Speaker Connections

Note
Production of some of the peripherals and related devices described in this chapter has been discontinued. For advice about
choosing devices, please contact your Sony dealer or a Sony sales representative.

Sample configuration using the SRP-X500P factory-settings

In this configuration, the SRP-X500P can be used without having to change the settings with the supplied SRP-X500P
Manager software.
AN-820 UHF Antenna or the
supplied antenna
Wireless
microphone
Table-top
microphone, etc.
Programmable
remote
commander
• The configuration above uses two WRU-806 UHF Synthesizer Tuner Units or two URX-M2 Tuner Units included in
the UWP-X7/X8.
• When an electric condenser microphone is connected to the MIC INPUT 3 or 4 connector, set the +48V ON/OFF switch
for the respective connector to ON.
18
System Configurations and Speaker Connections
Transmitter
Document
PC
camera
VIDEO
RGB OUT
OUT
VIDEO OUT LINE OUT
VCR , DVD player,
etc.
RGB OUT
PC
PROJECTOR CONTROL RS-232C
AN-820 UHF Antenna or the supplied
antenna
LINE
OUT
3 #
3 #
3 #
3
# 3 #
LINE OUT
LINE
IN
MD recorder
LINE OUT
Projector
INPUT
Front
speaker
Transmitter
(L)
Wireless microphone
To power source
High-impedance
speakers
Front
speaker
(R)