Hitachi 3080 G2 Hardware Reference Manual page 75

8. Without lifting the MFB, slide the MFB towards the rear of the server, as
shown in the next illustration.
The MFB should slide approximately 2 to 2.5 inches (5 to 7 centimeters),
creating a gap between the MFB and the top front of the chassis.
Looking into the gap, you will see six (6) cables connecting the MFB to
the rest of the server. A cable tie is used to secure each cable.
Replacing server components 75
Hitachi NAS Platform 3080/3090 G2 Hardware Reference Guide