This section describes the components included in the server chassis.
A Hitachi Unified Storage File Module system can contain single Hitachi NAS
Platform server or several servers that operate as a cluster. Clusters of more
than two servers include two 10 Gbps Ethernet switches. Hitachi Data
Systems only requires two switches for redundancy.
For information about the physical configuration of a cluster configuration,
see the Hitachi NAS Platform and Hitachi Unified Storage File Module System
Installation Guide.
The Hitachi NAS Platform server chassis consists of
• A removable fascia
• MMB (Mercury Motherboard)
• MFB (Mercury FPGA Board)
• Two hot-swappable fan assemblies
• Dual power supplies
• NVRAM backup battery pack
• Dual hot-swappable 2.5 inch disk drives
• Two PCI slots, two PCI-e x16 slots, and two PCI-X slots (not used at this
□
□
□
□
□
□
36
Hitachi NAS Platform server
time)
Ventilation
Server front panel
LED status indicators
NVRAM backup battery pack
Hard disk drives
Fans
Hitachi NAS Platform server components
Hitachi NAS Platform 3080/3090 G2 Hardware Reference Guide
5
components