WinBIOS Setup
Video power down mode
This option specifies the power management state that the video subsystem
enters after the specified period of display inactivity has expired. The settings
are: Disabled, Standby, or Suspend.
Hard disk power down mode
This option specifies the power management state that the hard disk drive
enters after the specified period of display inactivity has expired. The settings
are Disabled, Standby, or Suspend.
Hard disk timeout
This option specifies the length of a period of hard disk inactivity. When this
period expires, the hard disk drive enters the power-conserving mode specified
7
in the Hard Disk Power Down Mode option. The settings are Disabled, 1
Minute, and all one minute intervals up to and including 15 Minutes.
Full on to standby timeout
This option specifies the length of the period of system inactivity when the
computer is in Full-On mode before the computer is placed in Standby mode.
In Standby mode, some power use is curtailed. The settings are Disabled, 1
Minute, 2 Minutes, and all one minute intervals up to and including 15
Minutes.
Standby to suspend timeout
This option specifies the length of the period of system inactivity when the
computer is already in Standby mode before the computer is placed in Suspend
mode. In Suspend mode, nearly all power use is curtailed. The settings are
Disabled, 1 Minute, 2 Minutes, and all one minute intervals up to and including
15 Minutes.
7-20