Sony DVP-S300 Training Manual page 94

S

Sony Service Company
National Technical Services
A Division of Sony Electronics Inc.
Park Ridge, New Jersey 07656
Model:
Subject: ERROR CODE "E:07:00" WHEN UNIT
POWERS ON
Symptom:
(1730) Sometimes the DVD player displays Error Code "E:07:00" when the player is
turned on from a stand-by mode. If this error code appears, the player will not
do any functions. You must remove the power plug from AC outlet for a few
seconds and connect into the outlet again. Do the following procedure if
symptom occurs.
Solution: Connect pin95 of IC252 to GND with wire on the MB-Board. After soldering
both sides of the wire, attach SONY BOND (SC608LV) part# 7-432-912-52 .
CONFIDENTIAL
Service Bulletin
Multi-Disc Players
DVP-S300, DVP-S500D, DVP-S7700
csv-5
60
No.
Date: July 26, 1999