Table of Contents
Advertisement
ADVANCED SETTINGS
Delayed fax job
You can define a specific start time for your fax jobs in order to compensate for any differences in time zones or
in order to take advantage of low-rate charges. Again, it is particularly advantageous that your document or
documents are not read into memory, as the document feed is not blocked.
The delay applicable for sending the fax job is not only limited to 24 hours: You can program the fax job up to
30 days in advance.
The setting of the start time relates to the following fax jobs:
• Single transmission
• Broadcast transmission
• Single polling
• Multiple polling
DELAYED
COMM.
. . . . .
15-MAR-00 WED 19:56
RESIDUAL MEMORY 100%
DELAYED COMM
TIME = HH : MM
:
DELAYED COMM
TIME = HH : MM
22 : 33
RESIDUAL MEMORY 100%
ENTER TEL NUMBER
Standby mode
Load original
Remember: Printed side face down
Document ready
Operate the Menu function template
Press the corresponding function key
Make your selection
for start time (HH:MM) and day (DD)
DD
Enter the start time
Example: 22:33 hours on the 18th
If the delayed fax job (within the next
minute!) is to be performed on the
same day, please leave "DD" blank
DD
18
The following fax job is linked to the start
time which has just been set.
Any fax job...
• Single transmission
• Broadcast transmission
• Single polling
• Multiple polling
103
Advertisement
Table of Contents
