Serverinfo Sftp - Fujitsu XG0224 User Manual

XG Series User's Guide

5.15.8.13 serverinfo sftp

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
Set the SSH FTP server function.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
serverinfo sftp ip <mode>
<mode>
• on
Enable the SSH FTP server function.
• off
Disable the SSH FTP server function.
Configuration mode (admin class)
Set whether or not to enable the SSH FTP server function.
Setting this command OFF and the
request using the IPv4 address from the sftp client.
Setting this command OFF and the
request using the IPv4 address from the sftp client after the password was entered.
Enabling this command generates an SSH host authentication key at device power-on
and execution of the "reset"
minutes for the processing time.
sftp connection is enabled after the SSH host authentication key generation was
completed.
If this device has been started to enable this function while all the ssh and sftp functions
were Off, it also takes several tens of seconds to several minutes for the processing time
to generate an SSH host authentication key. Note that other processes may be affected;
session monitoring timeout may occur, for example.
It is assumed that the SSH FTP server function is enabled.
serverinfo sftp ip on
"serverinfo ssh" command Off will reject a connection
"serverinfo ssh" command On will reject a connection
command, and it takes several tens of seconds to several
312
Chapter 5 Command Reference
Device Information Settings