Lldp Information Settings; Lldp Information; Lldp Send Interval - Fujitsu XG0224 User Manual

XG Series User's Guide
5.9

LLDP Information Settings

This section explains about Loop Detection information settings.
5.9.1

LLDP Information

This section explains about the commands related to LLDP Information.
5.9.1.1

lldp send interval

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Set LLDP send interval
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
lldp send interval <interval> <delay>
<interval>
• LLDP send interval
Specify LLDP send interval with a decimal value with h (hours), m (minutes), s (seconds)
It can be specified from 5 seconds to 32768 seconds.
This setting corresponds to msgTxInterval in 802.1AB
<delay>
• LLDP send miimal interval
Specify LLDP send minimal interval with a decimal value with h (hours), m (minutes), s
(seconds) It can be specified from 1 second to 0.25 x <interval>seconds (Max is 8192 sec).
This setting corresponds to TxDelay in 802.1AB
Configuration mode (admin class)
Specify LLDP send interval which this device sends LLDP information periodically with
and LLDP send minimal interval which this device sends LLDP information when LLDP
information is changed
It is assumed that 30sec is set for LLDP send interval and 2sec is set for LLDP send
miimal interval.
lldp send interval 30s 2s
230
Chapter 5 Command Reference

LLDP Information Settings