Syslog Source Address - Fujitsu XG0224 User Manual

XG Series User's Guide

5.15.2.9 syslog source address

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Set the source IP address of the system log information.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
syslog source address <address>
<address>
Specify the source IPv4 address that is used for sending the system log information.
The allowable range is as follows:
1.0.0.1 to 126.255.255.254
128.0.0.1 to 191.255.255.254
192.0.0.1 to 223.255.255.254
Configuration mode (admin class)
Specify the source IPv4 address that is used for sending the system log information.
If the IPv4 address is not set, the IPv4 address of the sending interface is used.
It is assumed that use the IPv4 address of the sending interface in used.
290
Chapter 5 Command Reference
Device Information Settings