Epson Artisan 700 Service Manual page 185

Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
CARD SLOT ASSY
No. FFC/cable name
1 I/F FFC (Infra-red)
2 SUB FFC
3 STG FFC
for the connector positions on the Main Board.
Note * : See Fig. 4-245
Bottom of the
Card Slot Assy
I/F FFC (Mounted only in Japanese
models.):Secure this with acetate tape on the
bottom of the Card Slot Assy.
Front side of the
Card Slot Assy
STG FFC:
Fold this back to the front of the Card Slot
Assy and secure it with acetate tape.
Figure 4-249. Card Slot Assy (1)
DISASSEMBLY/ASSEMBLY
*
CN No. Remarks
Mounted only in Japanese
CN32
models.
CN7 ---
CN31 Ferrite Core x2
Acetate tape
SUB FFC
Fold
Double-sided tape
Fold line
Ferrite Core Holder A
Before installation
Put the FFC
through the
Ferrite Core
Holder A after
folding it back
Fold
Routing FFC/cables
SUB FFC:
Route this between Ferrite Core and Base Frame, and
secure it to the Main Board Unit with double-sided tape
Ferrite Core
I/F FFC (Mounted only in
Japanese models.):Route
this between SUB FFC
and Base Frame.
STG FFC:
Insert ferrite core on STG FFC into Base Frame,
and put the FFC through Ferrite Core Holder A,
then attach them to the Main Board Unit.
After installation
Main Board Unit
STG FFC
Ferrite Core Holder A
Figure 4-250. Card Slot Assy (2)
Revision C
Double-sided tape
Fold line
STG FFC
Double-
sided tape
205
Confidential