Epson Artisan 700 Service Manual page 143

Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
4. Release the hooks (x2) of the Main Frame and remove the Upper Paper Guide
R in the direction of the arrow.
Rear side
Figure 4-150. Removing the Upper Paper Guide R
DISASSEMBLY/ASSEMBLY
Upper Paper Guide R
Hook
Align the positioning hole of the PE Sensor with the dowel of
the Paper Guide Front Assy. (See
When installing the PE Sensor, insert the sensor with the Upper
Paper Guide sheet in between. (See
The roller of the Upper Paper Guide R in the figure below only
is installed in the opposite direction; therefore, make sure to
install it properly when the roller comes off.
Disassembly Procedures
Fig.
Fig.
PE Sensor
Upper Paper Guide sheet
Figure 4-151. Installing the PE Sensor
Roller to be installed reversely
Figure 4-152. Installing the roller
Revision C
4-149.)
4-149, Fig. 4-151.)
Upper Paper Guide R
Upper Paper Guide R
Roller's convex part
162
Confidential