Epson Artisan 700 Service Manual page 120

Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
4. Remove the screw (x1) that secures the Intermediate Roller fixing plate, and
remove the Intermediate Roller fixing plate from the Lower ASF Paper Guide
Assy.
Rear side
Intermediate Roller A
Roller fixing plate
Lower ASF Paper Guide Assy
Figure 4-90. Removing the Lower ASF Paper Guide Assy (3)
5. Remove the Intermediate Roller A from the Lower ASF Paper Guide Assy.
Rear side
Intermediate Roller A
Lower ASF Paper Guide Assy
Figure 4-91. Removing the Lower ASF Paper Guide Assy (4)
DISASSEMBLY/ASSEMBLY
C.B.P. 3x8 (6±1Kgfcm)
Disassembly Procedures
Paper feed defect will occur if the flap of the Lower ASF Paper
Guide Assy comes off; therefore, take care in the following
points to make sure that the flap is surely attached when
installing the Lower ASF Paper Guide Assy.
Make sure that the shaft of the flap is surely installed.
•
• The ribs (x2) of the flap are positioned on the rear of the Lower
ASF Paper Guide Assy.
Rear side
Flap
Figure 4-92. Installing the flap
Revision C
Rib
Flap's shaft
139
Confidential