Bosch DIVAR IP 6000 1U Installation Manual page 21

DIVAR IP 6000 1U
1
To replace the power supply:
1.
2.
3.
4.
5.
6.
Bosch Sicherheitssysteme GmbH
Release Tab
Turn off the unit and unplug the power cord. If your chassis includes a redundant power
supply (at least two power modules), you can leave the unit running and remove only one
power supply.
Push the release tab on the back of the power supply.
Pull the power supply out using the handle provided.
Replace the failed power module with the same model.
Push the new power supply module into the power bay until you hear a click.
Plug the power cord back into the module and power up the server.
Installation manual
Chassis setup and maintenance | en
2014.01 | V2 | DOC
21