GE DVSR xU User Manual page 93

DVSR xU User Manual
2. Select either FTP or USB upgrade mode.
3. If you select FTP mode, the FTP Upgrade dialog box appears. Press Enter or left-click the mouse to
confirm. The DVSR xU will connect with the FTP server via network and download the firmware
file. Press ESC, or right-click the mouse, to cancel.
If you select the USB mode, you must connect a USB flash memory to the DVSR xU and confirm
that the firmware file is in the root directory. Press Enter or left-click the mouse to start the
upgrade.
Note: The firmware must be downloaded to the USB main directory, and the file named "digicap".
4. After successfully upgrading the firmware, press ESC or right-click the mouse to return to the
main menu.
5. Press OK to reboot the DVSR xU.
To restore factory default settings
1. In the System menu go to the Factory Defaults restore button and press Enter or left-click the
mouse. The factory default dialog box appears. See Figure 63.
Figure 63: Factory default dialog box
2. Select OK. The system will automatically reboot.
Caution: If during rebooting the DVSR xU makes a lot of noise, check that the video standard is
correctly set to PAL (default) in the Display menu.
89