Snmp - Bosch DIVAR AN 5000 Operation Manual

DIVAR AN 3000 / DIVAR AN 5000
–
6.6.9

SNMP

Figure 6.18: Network - SNMP
SNMP (Simple Network Management Protocol) provides the basic network management frame
of the network management system.
Here you require software tools (MIB Builder and MG-SOFT MIB Browser), plus two MIB files
to connect to the device (contact Bosch or your system administrator for more details on
these tools).
Use the following steps to configure:
1.
2.
3.
4.
5.
6.
7.
Bosch Security Systems
Alarm
Select the 'SNMP enable' box.
Enter the IP address of the PC that is running the software in the field 'Trap address'.
Use defaults for the remaining items.
Compile the two MIB files using 'MIB Builder'.
Run 'MG-SOFT MIB Browser' to load the compiled MIB files to the software.
Input the device IP you want to manage in the 'MG-SOFT MIB Browser' (set the
corresponding version for future reference).
Open the tree list on the MG-SOFT MIB Browser to view the device configuration (how
many video channels, audio channels, application version, etc.).
Operations Manual
Configuration | en 57
2015.02 | 2.1 | AM18-Q0669