Ddns; Mobile; Upnp; Pppoe - Bosch DIVAR 2000 Operation Manuals

34 en | Settings
Important: The system always needs to reboot if any of the above ports are changed. Make
sure the port values here do not conflict.
Streaming
Choose your preferred Live Video Stream Buffering:
– Realtime
– Balanced
– Network optimized
– Custom - set here your preferred streaming speed (default is 500 ms)
6.2.2

DDNS

Use the following steps to configure DDNS:
1. Select the 'DDNS enable' box.
2. Select a DDNS provider from the drop-down menu. The providers supported are: Bosch
free DDNS, NO-IP DDNS and Dyndns DDNS. All DDNS types can be valid at the same time;
you only need to select the required type from the drop-down menu.
3. Complete the details for the Domain as assigned by the provider. Also enter your email
address
4. Select the 'I agree to ... ' boxes.
5. Click <Save> and then reboot the system.
After rebooting, you must confirm your DDNS registration by replying to the email sent to you.
Now you can open the DDNS Server web search page.
6.2.3

Mobile

Use this page to scan the relevant QR codes for downloading the IOS or Android apps for
operating your DVR. Once the app is downloaded, scan the relevant QR code to add a Local or
Public device (and DDNS name).
6.2.4

UPnP

This protocol enables a mapping relationship between the LAN and the WAN:
– Enable or disable the UPnP function on this device
– Status – Can be Disable, Success, Searching or Unknown (when the system is offline)
– Router LAN IP
– Router WAN IP
The bottom table shows the PAT (port mapping list) with a one-to-one relationship with the
router port mapping setting:
1. Double-click a port to change a setting
2. Click <OK> when ready.
6.2.5

PPPoE

Enable or disable the PPPoE feature.
Enter your PPPoE 'User name','Password' and IP address supplied by your internet service
provider, and click <Apply>.
You will need to restart your system to automatically connect to the internet (the IP address
will be automatically assigned).
6.2.6

SNMP

SNMP (Simple Network Management Protocol) provides the basic network management frame
of the network management system, and can be used to retrieve basic system health
information. It can also be used to configure the system to send out traps for events such as
system reboot, video loss, hard disk errors, etc.
2016.09 | v1.0 | AM18-Q0717 Operation Manual
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
DIVAR 2000 / DIVAR 3000 / DIVAR
5000
Bosch Security Systems