Playback Mode; Setup Mode - Bosch DIVAR AN 5000 Operation Manual

118 en | Web Client Software
–
8.3.1

Playback mode

Figure 8.2: Web Client playback
The playback video window is shown by clicking the Playback button. Here you can:
–
–
–
–
–
–
All of these possibilities are described extensively in Search/Play, page 98.
If your web connection has low bandwidth:
–
–
–
8.3.2

Setup mode

Click <Setup> to enter the Setup menu where you can configure the settings for the unit.
2015.02 | 2.1 | AM18-Q0669
– For multiple-channel live mode, the system displays the second stream to monitor by
default. You cannot modify manually. All channels try to synchronize (the
synchronization effect depends on your network environment). For single channel
live mode, the system opens the main stream by default.
– The system does not support alarm activation to open the video function in the
Alarm interface.
The window display mode and the channel number are by default. For example, the max
window split mode is 16 for the 16-channel.
return to live video by clicking <Live>.
select different display modes (1 or 4 cameo displays, full screen)
assign cameras to cameos
jump to a specific date and time to view playback video
view a graphical timeline of the day for recording, input, or motion events
see unit status and alarm conditions
Only I-Frames are initially streamed to save bandwidth (in full screen, an I-Frame will be
streamed every second).
Playback starts at half-speed by default (the speed can be changed to single speed by
pressing FWD).
Exporting files may be slow.
Operations Manual
DIVAR AN 3000 / DIVAR AN 5000
Bosch Security Systems