Table of Contents
Advertisement
4
4-22 Performing Setup from the Control Panel
Network Setup
Protocol Setup
TCP/IP Setup
DNS Setup
DNS Setup options
DNS Setup
You can configure the ColorPASS so that it can access an appropriate DNS server.
With the DNS server, when connecting the Fiery utilities or Fiery WebTools from
remote workstations to the ColorPASS, users need to remember only its Server
Name, which is much easier to remember than an IP address.
Primary DNS server IP address
[0.0.0.0]
This option only appears if you have selected No to Get DNS Automatically. Enter the
IP address of the DNS server assigned to the copier on the network.
Secondary DNS Server IP Address
[0.0.0.0]
Specify the IP address of the secondary DNS server.
Domain Name
Enter the domain name of your DNS server.
Host name
Default server name
Enter the host name of the ColorPASS. By default, the host name is Server Name you
enter in Server Setup.
Choose Exit Setup from the main Setup menu when you have finished making Setup
changes. The ColorPASS will restart. All changes will be saved on restart.
Advertisement
Table of Contents
