Restart The Colorpass; Rebooting The Colorpass - Canon ColorPass-Z7400 Configuration Manual

7
7-18 Administering the ColorPASS

Restart the ColorPASS

Use the following procedure to restart the ColorPASS, rather than using the power
button on the front of the ColorPASS.
Restart Server restarts the ColorPASS system software without shutting down the
ColorPASS operating system.
T C PASS
O RESTART THE OLOR
1. Make sure the ColorPASS is not receiving, processing, or printing a job.
Make sure the status message on the Control Panel reads Idle.
2. Press the Menu button to display the Functions menu.
3. Use the down arrow button to scroll to the last screen, and choose Shut Down.
4. Use the line selection button to choose Restart Server.
To access the ACI, if installed, you must enter the user name and the password at the
ACI. The user name is

Rebooting the ColorPASS

Use the following procedure to reboot the ColorPASS. Reboot System shuts down and
restarts the ColorPASS system software and operating system.
T C PASS
O REBOOT THE OLOR
1. Make sure the ColorPASS is not receiving, processing, or printing a job.
Make sure the status message on the Control Panel reads Idle.
2. Press the Menu button to display the Functions menu.
3. Use the down arrow button to scroll to the last screen, and choose Shut Down.
4. Use the line selection button to choose Reboot System.
To access the ACI, if installed, you must enter the user name and the password at the
ACI. The user name is
Administrator , and the default password is "
Administrator , and the default password is "
Fiery.1 ".
Fiery.1 ".