Canon ColorPass-Z7400 Configuration Manual page 32

2
2-4 Setting up Network Servers
T C PASS
O ADD THE OLOR
W NT 4.0/2000/S
INDOWS
1. Register the IP address of the ColorPASS in the host name database used by
your system.
For installations that do not have a network administrator or central host name
database, add the ColorPASS to the
2003 server. Also add it to the
and will use the Fiery utilities.
The Windows NT 4.0/2000/Server 2003
UNIX
hosts
equivalent. It has the same format as the
of the hosts entry is:
IP Address<TAB>host name<TAB>#comments
where <TAB>
To determine the IP address and server name of your system, print a Configuration
page (see "Printing a Configuration page from the Control Panel"
If the ColorPASS has already been defined in an
N :
OTE
host name database on a UNIX workstation on your network, we recommend that you
use the same host name here as you used for the name of the remote printer in the
/etc/printcap
2. Perform ColorPASS Setup to support TCP/IP printing.
Enter the options in Protocol Setup (IP address of the ColorPASS, subnet mask, and
gateway address).
TCP/IP
TO A NETWORK WITH A
2003
ERVER SERVER
hosts
file on any workstations that have TCP/IP loaded
hosts
file. The file is used as a local Domain Name Services (DNS)
hosts
indicates that you press the Tab key.
file.
file on the Windows NT 4.0/2000/Server
file provides compatibility with the
hosts
file on UNIX servers. The format
/etc/hosts
on page 7-12).
/etc/hosts file or equivalent