Table of Contents
Advertisement
5
5-33 Network Setup
SNMP Setup
The following options can be accessed only in local Setup.
Enable SNMP
connection. Leaving this option unselected disables any access to remote Setup
through and Command WorkStation.
Community Name
read and write access. Once it is changed, the new community name must be entered
to read and write any information through remote Setup. Up to 32 ASCII characters
including spaces can be used for the community name.
A space at the beginning or end of the name is automatically deleted from the
N
:
OTE
name entered. When an invalid character is entered or no name is specified, the default
"public" is used for the community name. A name consisting only of spaces is invalid.
—Select to enable the SNMP communication over a TCP/IP or IPX
—Change the SNMP Community Name ("public" by default) for
Advertisement
Table of Contents
