NEC NEAX 2000 IVS Command Manual page 412

COMMAND CODE
D000
1. FUNCTION:
This command is used to assign SMDR and PMS functions.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
ST + D000 +
4. DATA TABLE:
DATA
2 Designation of the language in which the messages are to be print-
ed out.
11 By Check-In operation (
in time information has overflowed.
41 Action when the memory storing the call information for the
SMDR Terminal has overflowed.
56 Expansion Memory card (PN-ME00) is provided
60 Contents of the dial information to be sent out to the SMDR.
69 Change Guest Name by room change message from the PMS.
70 SMDR service for incoming call
71 5 digits station output
[CMD000] System Features (1)
TITLE:
SYSTEM FEATURES (1)
1ST DATA
DE + +
(1 – 3 digits)
1ST DATA
FUNCTION
+ Station No. +
CHK IN
ND-45669 (E)
2ND DATA
DE + + EXE
(0/1)
0
1
), check- 0
SET
1
0
1
0
1
0
1
0
1
0
1
0
1
:
2ND DATA
: Japanese
: English
: Not available
: Available
: No new data is stored.
: New data is stored by deleting the
oldest data.
: Not provided
: To provide
: Only the called party's number is
sent out.
: (The access code is not included.)
All the dial information inclusive of
the access code is sent out.
: Not available
: Available
: Effective only for incoming calls
with an Account code entered
: Effective for all incoming calls
: No
: Yes
Revision 2.0
CMD000
Initial Data
CHAPTER 3
Page 369