NEC NEAX 2000 IVS Command Manual page 109

CM08
COMMAND CODE
08
BASIC SERVICE FEATURE
405 Consecutive Speed Dialing when making an ISDN call.
424 Method of charging a transferred call (for use with CP03
(MP) only)
425 Charging to the transfer destination station or the transferring
station (for use with CP03 (MP) only)
Shown below are stations to which call charging is to be made in the case of various transfer patterns.
Transfer Patterns
Call transfer from STA A to
STA B
Call transfer from a station
(STA) to ATTCON
Call transfer from ATTCON
to a station (STA)
Call transfer from ATTCON
A to ATTCON B
426 SMDR for incoming call if the account code is not entered
(for use with CP03 (MP) only)
Note: When this data is assigned to 1, SMDR for incom-
ing call is not provided even if CM13YY=05 and
CM35 YY=49 is 0 (To be provided).
427 Sending additional DTMF signals when called station an-
swers, if assigning station number + additional DTMF signals
to One-Touch key on a Multiline Terminal
428 VMS transfer from ATTCON, if Camp-On is set and not an-
swered
430 Sending out of Calling Party Subaddress to an ISDN network
when making a call from an ISDN Terminal
431 Assignment of Calling Party Subaddress to an ISDN network
when making a call from an ISDN Terminal
CHAPTER 3
Page 86
Revision 2.0
TITLE:
BASIC SERVICE FEATURES
CM08-424=1
Split charging to
STA A and STA B
Split charging to
ATTCON A and
ATTCON B
ND-45669 (E)
0
1
0
1
0
1
CM08-424=0
CM08-425=1
STA B
STA STA
STA STA
ATTCON B
0
1
0
1
0
1
0
1
0
1
:
SETTING DATA
Available
Not available
Charging to the transferring station or
the transfer destination station.
Split charging to both the transferring
station and transfer destination station.
Charging to the transferring station.
Charging to the transfer destination
station.
CM08-424=0
CM08-425=0
STA A
STA
STA
ATTCON A
To provide
Not provided
To send
Not sent
To provide
Not provided
To send
(Depend on CM08-431)
Not sent
ISDN Circuit Station No. assigned by
CM10
ISDN Terminal No.
Initial Data