[Cm77] Station/Trunk Name Asignment - NEC NEAX 2000 IVS Command Manual

CM77
COMMAND CODE
77
MAT
1. FUNCTION:
This command is used to assign the name of each station and trunk route which is displayed on Multiline
Terminal or ATTCON.
2. PRECAUTION:
This command is included in MAT mode menu "E7" (Name Display [COM02]).
3. ASSIGNMENT PROCEDURE:
ST + 77Y + DE +
4. DATA TABLE:
Y
No. MEANING
0 Station Name
Assignment
with Character
Code
1 Station Name
(STA) Assignment
with character
2 Trunk Name
Assignment
with Character
Code
3 Trunk Name
(TRK) Assignment
with character
Note 1: The characters available for assigning are 0 – 9, A – Z for MAT/Multiline Terminal.
Note 2: Station Name assignment is also available in each Multiline Terminal or ATTCON by using the
access code assigned with CM20-A10.
Note 3: Trunk names are assigned on a Trunk Route basis only.
CHAPTER 3
Page 252
Revision 2.0
[CM77] Station/Trunk Name Asignment
TITLE:
Station/Trunk Name Asignment
STATION NUMBER
(1-4 digits)
STATION No./
TRUNK NAME No.
X-XXXX: Station
Number/
Primary
Extension
Number
00-14: Trunk
Name No.
assigned
by CM35
YY = 03.
ND-45669 (E)
TRUNK NAME
NUMBER + DE +
(2 digits
SETTING DATA
DATA MEANING
20 Character Code
(Max. 16 digits)
7F Refer to Character Code
Table on the next page.
X Character (Max. 8 digits)
Note 1
X . . . . .X
20 Character Code
(Max. 8 digits)
7F Refer to Character Code
Table on the next page.
X Character (Max.4 digits)
Note 1
X . . . . .X
DATA
+ EXE
(1-16 digits)
REMARKS
CM08-255
CM35 YY = 03
CM08-255