[Cm1A] Data Station Number - NEC NEAX 2000 IVS Command Manual

COMMAND CODE
1A
MAT
1. FUNCTION:
This command is used to assign the Data Station Numbers for accommodating the data terminals via the
Multiline Terminal.
2. PRECAUTION:
(1) This command requires a system reset after setting the data.
(2) This command is included in MAT mode menu "A1" (Station number & Class [COM01]).
3. ASSIGNMENT PROCEDURE:
ST + 1A + DE +
4. DATA TABLE:
(1) Primary Extension Numbers are given by CM10 (FX–FXXXX).
(2) Data Station Number should be different from station number,
Primary Extension Number and Multiline Station Number assigned by CM10 and CM11.
[CM1A] Data Station Number
TITLE:
DATA STATION NUMBER
PRIMARY EXTENSION NUMBER
(1-4 digits)
ND-45669 (E)
DATA
STATION
+ DE +
NUMBER
(1-4 digits)
CM1A
INITIAL
+ EXE
CHAPTER 3
Page 125
Revision 2.0