Ip40 Satellite X To Check Point Fp3/Daip; Setting Up Check Point Fp3; Setting Up The Nokia Ip40 Satellite X - Nokia IP40 User Manual

Note
For information on setting up VPN-1, refer to the Check Point Virtual Private Networks.

IP40 Satellite X to Check Point FP3/DAIP

The IP40 Satellite X can be used as a VPN server to establish a VPN connectivity with Check
Point FP3 server using Check Point FP3 DAIP object.

Setting Up Check Point FP3

Configure a VPN Tunnel between an IP40 Satellite X and Check Point FP3 server.
To set up Check Point FP3
1. Define a DAIP object.
Enable IKE.
2. Use VPN export tool to create a .p12 certificate from the internal certificate defined for the
DAIP object.
3. Configure a rule set with the following:
Source: internal network of the IP40 DAIP object
Destination: internal network of FP3
Select Encrypt
Push the policy on to the FP3 firewall object.
4. Import the certificate to the computer to which the IP40 Satellite X is connected.
Use FTP or a floppy disk to import the certificate.

Setting up the Nokia IP40 Satellite X

Configure a VPN Tunnel between an IP40 Satellite X and Check Point FP3 server.
To set up the IP40 Satellite X
1. On the IP40 GUI, click VPN.
The VPN page appears.
2. Click Certificates.
On the Certificates page, browse for the certificate.
Click Upload.
3. Enter the Certificate pass phrase that you use to create the certificate.
4. Click OK.
Nokia IP40 User Guide
Site-to-Site VPNs
151