Nokia IP40 User Manual page 133

To configure a site-to-site VPN gateway
1. Enter the IP address of the VPN gateway.
2. Check the Unrestricted Access box if the NAT rules should be bypassed.
3. Select the Download Configuration option if the topology is to be downloaded.
a. Enter the Topology user and Topology password.
b. Check Use Shared Secret or Use Certificate depending on the secure communication
c. If you choose Use Shared Secret, enter the Shared Secret.
4. If Specify Configuration option is slected
a. In the Destination network column, enter up to three destination network addresses at the
b. In the Subnet mask column, select the subnet masks for the destination network
Note
Obtain the destination networks and subnet masks from the VPN site's system
administrator.
c. Click Next.
The Shared Secret dialog box appears.
d. Enter the shared secret to use for secure communications with the VPN site.
e. Click Next.
5. If the Route All Traffic option is selected
You are ready to complete your VPN site. Refer to
to continue.
Nokia IP40 User Guide
method to be used.
VPN site to which you want to connect.
addresses.
This shared secret is a string used to identify the VPN sites to each other. The secret can
contain spaces and special characters.
Remote Access VPNs
"Completing Site Creation" on page 134
133