OfficeServ 7100
TECHNICAL MANUAL
1.3 POWER CONDITIONS
The power supply card of the OfficeServ 7100 system receives AC input power or
battery power, and supplies -48 V, -5 V, +5 V, +3.3 V, +12 V, and -54V (Battery
Backup) to the system cabinet.
The rating is as follows:
• RATING: AC 110-120 V; 3 A; 50/60 Hz or DC –48 V 3 A
Power Supply Unit(PSU)
PSU
Power Consumption
1.4 UNPACKING AND INSPECTION
The OfficeServ 7100 can only be configured as a single cabinet system.
After unpacking the cabinet, inspect for signs of physical damage. If any damage is
detected, do not attempt to install the system. Contact Samsung Telecommunications
America Technical Support Department.
Check to see that each cabinet carton includes the following:
• OfficeServ 7100 cabinet
• AC Power Cable
• Wall mount plate
• Screw Pack
• Battery Cable Assembly
• Blanking Plates (1)
Table 1.1 Power Specifications
Input power
AC 110 V
DC 48V
–
(
48VDC, 3A for battery backup ONLY)
Output power
- DC -54V, 1.1 A
- DC +5 V, 5.0 A
- DC -5.3 V, 0.3 A
- DC +3.3 V, 5 A
- DC +12 V, 0.4 A
- DC -54V, 0.25 A (for battery backup)
105 Watts
1.4
Home Page
INSTALLATION
PART 1 APRIL 2007
Specification
Table of Contents