RAE/RAK–1N
Service Software
Equipment Setup
To set up the equipment, connect the M2BUS adapter to the serial port
(RS–232) of the computer. In case you are using a 9–pin serial port
(normal with an AT set) use the mating adapter supplied with the M2BUS
adapter. Turn off the computer before connecting to avoid possible
damage to the serial port.
Attach one end of the XCM–1 modular cable to the DAU–2 PC/M2BUS
adapter and the other end to the modulator T–connector when the covers
of the phone are in place.
Page 7– 74
After Sales
Technical Documentation
Amendment 1 04/97