3G Flash Procedures; Introduction; Hardware Requirements; Power Solution - Motorola A920 Service Manual

Introduction

This document is intended to describe the flashing (soft-
ware updates) and procedures for 3G terminals. The
3G terminal described in this document will be limited
to the A920/A925.
Software updates need to be handled in a controlled
manner. Carrier software approvals need to be consid-
ered before initializing a flashing procedure. Consult a
Motorola representative to ensure that the correct soft-
ware is programmed.
Software updates allows the service organization to re-
solve field software issues that customers may be ex-
periencing. Some issues may pertain to specific condi-
tions, therefore, not all units will contain identical soft-
ware versions.

Hardware Requirements

The following hardware will be required to properly
flash the phone.

Power Solution

1.
2.

Interface Solution

1.
Motorola Confidential Proprietary

3G Flash Procedures

Fully Charged battery (SNN5638A)
Full-rate Charger (PSM5049A)
USB PST Tool Kit (S8951)
USB Cable (SKN6311A)
Security Key
Adapter kit
Power supply (SPN4059A)
1-1