Audio/Vibrator Test Procedures; Vibrator Test - Motorola A920 Service Manual

Manual Test Procdures

Audio/Vibrator Test Procedures

Radio Comm Test Commands
Click on WCDMA
For W_CARRIER assign these actions to each field
Freq ID (Dec)
Action
Channelization
Data Pattern
Scrambling
DPCCH
DPDCH
Channelization Code
Transmit Power
Max Power
Min Power
Scram Code
¹0x0015 -> 21 dec -> +21dBm
²0x0080 -> 128 dec -> (128-256 = -128 dBm)
3 - 12
9750
Enable
Enable
PN 9
Long
SF256, SF0
SF256, SF0
00
15¹
15¹
80²
00
Motorola Confidential Proprietary
Audio/Vibrator Test Procedures
This section describes how to use test commands to
verify audio and vibrate functions.
In order to successfully send test commands to the phone
under test, the phone needs to be in suspend mode.
Follow the listed procedure to place the phone in sus-
pend mode.
Handset Test Commands
54 ok Suspend
Radio Comm Test Commands
Click AT+MODE then SUSPEND
(Serial Only)
Click PST Initialize and click SUS-
PEND when initialization is complete
(USB Only)

Vibrator Test

Handset Test Commands
3*0*1
3*0*0
Radio Comm Test Commands
Enable or Disable Vibrator
Verification
Verfiy vibration function when enabled.
A920/A925
Enable Vibrator
Disable Vibrator
Preliminary